Toolbar Options; Filtering The Message List - 3Com 3CRWX120695A Reference Manual

374 C 8: M
HAPTER ANAGING

Toolbar Options

Filtering the Message
WX S I
YSTEM MAGES AND
The Verification tab contains a Config Verification tab and a Network
Verification tab:
The Config Verification tab shows errors and warnings for WX switch
configuration information in 3WXM.
The Network Verification tab shows errors and warnings for
configuration information in the network. The errors and warnings
can be for WX switch configuration items and for the monitoring
service.
On each tab, the Message column lists error descriptions in red and lists
warning descriptions in orange:
Errors are serious problems that must be addressed before
deployment. By default, you cannot deploy a network plan with errors
in it. After fixing errors, verify the network plan again to ensure that
the errors have been resolved.
Warnings are noncritical issues that do not stop deployment. Review
any warnings and consider resolving the issues before deployment.
Details about the selected error or warning appear in the lower left
section of the tab.
The Resolution section of the tab lists options for resolving the warning or
error.
(For a list of the verification rules, see "3WXM Verification Rules" on
page 517.)
Table 26 lists the options on the Event tab's toolbar.
Table 26 Toolbar Options on Verification Tab
Option
Refresh
Options
By default, all warning and error messages are listed. You can use the
List following options to filter the message list:
C
ONFIGURATIONS
Description
Refreshes the data.
Displays the Verification Options dialog box, which enables
you to change verification options and disable or reenable
rules. (See "Changing Verification Options" on page 376.)