3Com 3CRWX120695A Reference Manual page 352

352 C 7: C
HAPTER ONFIGURING
A , A
UTHENTICATION
1 (minimum monetary cost) — Packets with minimum monetary
cost TOS defined are filtered.
2 (maximum reliability) — Packets with maximum reliability TOS
defined are filtered.
4 (maximum throughput) — Packets with maximum throughput
TOS defined are filtered.
8 (minimum delay) — Packets with minimum delay TOS defined are
filtered.
By default, the TOS value is -1 (any).
In addition to these specific values, you can specify a number from 1 to
15 that is the sum of TOS option values. For example, to select minimum
delay and maximum throughput as the TOS options, type 12, which is the
sum of the two values.
9 In the Precedence list, select one of the following:
Any (-1) — All packets are subject to the ACL regardless of whether
precedence is set.
Routine (0) — Packets with routine precedence are filtered.
Priority (1) — Packets with priority precedence are filtered.
Immediate (2) — Packets with immediate precedence are filtered.
Flash (3) — Packets with flash precedence are filtered.
Flash Override (4) — Packets with flash override precedence are
filtered.
CRITIC/ECP (5) — Packets with critical precedence are filtered.
Internetwork Control (6) — Packets with internetwork control
precedence are filtered.
Network Control (7) — Packets with network control precedence
are filtered.
10 To close the Create IP ACE dialog box and save the changes, click Finish.
Creating a TCP or UDP ACE
To create a TCP or UDP ACE:
1 In the ACL Setup page of the Create ACL wizard, click New. A list of
ACEs appears.
2 Select the ACE you want to create.
, A
UTHORIZATION AND CCOUNTING
P
ARAMETERS