To Configure A Distributed Map - 3Com 3CRWX120695A Reference Manual

To configure a
distributed MAP
1 Access the WX Switch wizard for the WX switch. (See "Accessing the
2 Select Wireless at the top of the wizard, if not already selected.
3 Select Distributed MAP from the organizer list on the left side of the
Table 20 lists how many MAPs you can configure on a WX switch, and
how many MAPs a switch can boot. The numbers are for directly
connected and Distributed MAPs combined.
Maximum MAPs Supported Per Switch
Table 21
WX Switch Model
WX4400
WX1200
For a MAP that is directly connected to the WX, configure a MAP port
instead. (For information, see "Configuring Directly Connected MAP
Access Points" on page 274.)
To configure a distributed MAP, use the following procedure.
Modify Switch Wizard" on page 185.)
page.
Configuring Distributed MAP Access Points
Maximum
Configured
256
30
Maximum Booted
24, 48, 72, or 96,
depending on the
license.
12
285