3Com 3CRWX120695A Reference Manual page 240

240 C 5: C
HAPTER ONFIGURING
WX S A
YSTEM AND DMINISTRATIVE
route command output shows that the static route is down. For more
information about these commands, see the Wireless LAN Switch and
Controller Command Reference.
To create a static route
1 Do one of the following:
Open the WX Switch wizard, then select IP Routes under IP Services in
the organizer list of the System and Administrative page.
In the Organizer panel, select IP Services under a WX switch or
Domain Policies, then select Edit > Properties. The Modify IP Services
wizard appears.
Here is an example of the IP Routes page in the WX Switch wizard.
2 Select New Static Route. The Create Static Route dialog box appears.
P
ARAMETERS