3Com 3CRWX120695A Reference Manual page 388

388 C 8: M
HAPTER ANAGING
WX S I
YSTEM MAGES AND
The dialog lists the WX switches that have configuration changes.
3 Select the WX switches to which you want to deploy the changes.
To select more than one WX, click Shift while clicking to select
contiguous items, or click Ctrl while clicking to select noncontiguous
items.
4 To save to the configuration file on the WX, make sure that Save WX
Configuration is selected.
By default, this option is selected. If you deselect this option, 3WXM
sends the configuration changes to the WX switch but the changes are
not saved in the WX switch's configuration file and are therefore not
restored following a restart of the WX switch.
5 Click Deploy Now.
The deployment status for each affected WX is shown on the History tab
at the bottom of the dialog box.
If errors occur, click Selected Errors to view the errors. If there are errors,
fix them and verify the changes before trying to deploy again. (You can
use the Verification tab to fix the errors. See "Verifying Configuration
Information" on page 373.)
6 Click Close to return to the Managed Devices tab.
7 If the network plan is successfully deployed and synchronized, save the
network plan at this time.
To accept network changes
1 Select one or more WX switches.
To select multiple WX switches, press Shift (for contiguous WX switches)
or Control (for noncontiguous WX switches) while clicking.
2 In the Network Changes group box, click Accept.
The status is shown in the Network Status and Local Status columns.
3 Click Close.
To undo changes
1 Select one or more WX switches.
To select multiple WX switches, press Shift (for contiguous WX switches)
or Control (for noncontiguous WX switches) while clicking.
C
ONFIGURATIONS