Changing Colors - 3Com 3CRWX120695A Reference Manual

Changing Colors

1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the RF tab.
3 Select one of the following tabs:
4 Click on the color column for the color you want to change. The Choose
You can change the color schemes for showing the following types of RF
information:
802.11a channels
802.11b and 802.11g channels
RF obstacles
Radio transmit data rates
Receive signal strength (RSSI)
Signal-to-noise ratio (SNR)
Client load (number of clients associated with a radio)
Probability of a rogue device or client being in a specific location
For each scheme, you can change a color using any of the following
methods:
Select a color from a predefined palette.
Change the hue, saturation, and brightness (HSB) properties of a
color.
Change the red, blue, and green (RGB) properties of a color.
To Change a Color
802.11a Channel Colors
802.11b/g Channel Colors
RF Obstacle Colors
Data Rate Colors
RSSI Band Colors
SNR Band Colors
Load Band Colors
Probability Colors
Color dialog box appears.
Changing Options for RF Planning 509