Toolbar Options; Filtering The Rogue List - 3Com 3CRWX120695A Reference Manual

Toolbar Options

Filtering the Rogue
List
The Rogue Detection tab has a toolbar. Table 53 lists the options on the
toolbar.
Table 53 Toolbar Options on Rogue Detection Tab
Option
Refresh
Auto Refresh
Filters
Show for selected
scope
Locate
Create Known Address Adds the selected MAC address to the known address list
Create Third Party AP
By default, the rogue list contains all rogues detected during the
most-recent polling interval, in all Mobility Domains in the network plan.
You can change the time period for which rogues are listed as well as the
scope of the list.
To filter the rogue list
1 Click Filters on the Rogue Detection tab's toolbar. The Rogue List Filter
Options dialog box appears.
Using the Rogue Detection Tab
Description
Refreshes the data by immediately polling the monitoring
service when you click the icon.
Sets the window to automatically refresh the data at
regular intervals, based on the polling interval set on the
monitoring service for rogue detection.
Opens the Rogue List Filter Options dialog box, which
enables you to filter the rogue list.
When selected, this option restricts the rogue list to the
scope of the object selected in the Organizer panel.
When this option is not selected, the rogue list includes all
Mobility Domains in the network plan.
Displays the rogue's location on the floor plan. (See
"Displaying a Rogue's Geographical Location" on
page 478.)
and removes it from the rogue list.
Changes the selected MAC address from a rogue into a
third-party AP.
475