Managing Wx Switch Configuration Changes - 3Com 3CRWX120695A Reference Manual

386 C 8: M
HAPTER ANAGING
Managing WX switch
Configuration
Changes
WX S I
YSTEM MAGES AND
You can review WX switch configuration changes, deploy local changes,
and accept or undo changes.
To review changes
1 Display the Managed Devices tab by doing one of the following:
Click on Local Changes or Network Changes in the Alerts panel.
Select View > Managed Devices from the main 3WXM toolbar.
2 To review changes:
a Select one or more WX switches.
To select multiple WX switches, press Shift (for contiguous WX
switches) or Control (for noncontiguous WX switches) while clicking.
b Click Review in the Local Changes group box to review local changes,
or in the Network Changes group box to review network changes.
c The Review Local Changes or Review Network Changes dialog box
appears, depending on whether you clicked Review for local changes
or network changes.
d Click on a WX switch listed on the left side of the dialog box to display
the configuration changes. The CLI commands for the changes are
shown.
Changes for each WX switch are displayed on separate tabs.
3 To print the changes, click Print.
C
ONFIGURATIONS