3Com 3CRWX120695A Reference Manual page 193

Wireless lan mobility system wireless lan switch manager

Hide thumbs Also See for 3CRWX120695A:

Table of Contents

5 In the VLAN ID box, specify a VLAN number (2 to 4095). The VLAN

number must be unique on a particular WX.

6 In the VLAN Name box, type the name of the VLAN (1 to 16 alphabetic

characters long, with no numbers, spaces, or tabs).

7 In the Tunnel Affinity box, specify the numeric value (1 to 10) that each

WX in a Mobility Domain advertises for each of its VLANs. The default

A higher tunnel affinity indicates a greater preference.

8 In the IP Address box, specify the IP address and subnet mask in classless

interdomain routing (CIDR) notation (for example, 10.10.10.10/16).

If you are creating a VLAN for a domain policy, this option is not available.

9 To enable IP on the VLAN, select IP State. To disable this option, clear IP

State. By default, this option is disabled.

If you are creating a VLAN for a domain policy, this option is not available.

Configuring VLANs

3crwx440095a