Defining Radius Servers - 3Com 3CRWX120695A Reference Manual

7 In the Key box, type the password (also known as a shared secret key)
8 In the Authorization Password box, type the password used for outbound
9 To make RADIUS packets from the WX switch use the system IP address
10 Do one of the following:
Defining RADIUS
Servers
1 Access the WX Switch wizard for the WX switch. (See "Accessing the
2 Select AAA at the top of the wizard, if not already selected.
3 Select Default RADIUS Parameters from the organizer list on the left side
used to authenticate to the RADIUS server.
You must provide the same password that is defined on the RADIUS
server. The password can be 1 to 32 characters long, with no spaces or
tabs.
authentication and authorization to a RADIUS server (1 to 32
alphanumeric characters, with no spaces or tabs). This authorization
password overrides the default authorization password for MAC users.
Providing an authorization password is required only for users whose
devices are authenticated by their MAC addresses or for last-resort users,
neither of which have a regular username or password. For MAC users,
the password is the user's MAC address, by default. MSS obtains the
MAC address from frames received from the device. For last-resort users,
the password is 3Com.
Changing the password applies both to MAC users and to last-resort
users.
as the source IP address, select Use System IP Address.
To define RADIUS servers, go to "Defining RADIUS Servers".
Click Finish to save the changes and close the wizard.
To use RADIUS servers for authentication, authorization, or accounting of
users, you need to define the servers in the network plan.
To define a RADIUS server
Modify Switch Wizard" on page 185.)
of the page, if not already selected.
Connecting to RADIUS Servers and Server Groups 295