Generating A Rogue Summary Report - 3Com 3CRWX120695A Reference Manual

496 C 12: G
HAPTER ENERATING
Generating a Rogue
Summary Report
R
EPORTS
The rogue summary report lists information about rogues.
The data for this report comes from the monitoring service. The Enable
Rogue Detection option, located in the Rogue Detection group box of
the Monitoring Settings tab, must be enabled. (See "Changing
Monitoring Settings" on page 552.)
1 Select Reports > Rogue Summary from the toolbar in the main 3WXM
window.
The Rogue Summary Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type listbox:
Mobility Domain
Site
Building
Floor
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
1 Hour
24 Hours
7 Days
30 Days
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The report lists the BSSIDs of the rogues detected by each WX switch. The
report also shows graphs of the distribution of rogues on the WX
switches, and of trend data.