If you import a configuration containing information that an older version
of 3WXM or MSS does not support, the information is ignored when the
configuration is imported.
If you import a WX switch configuration, you must enable 3WXM
management of the WX switch before you can deploy the WX switch to
the network. (To enable 3WXM management of a WX switch, see
"Configuring Basic WX Properties" on page 186.)
To import a
To import a configuration, use the following procedure.
configuration
1 In the main 3WXM window, select File > Import. The Import
Configurations dialog box appears.
2 In the Import Into Mobility Domain group box, select one of the following
options:
3 To replace existing WX switch information in 3WXM with information
from the configuration file, select Overwrite Existing WX Switches.
Importing and Exporting WX switch Configuration Files
Click Use File Info to import the configuration information using the
Mobility Domain specified in the configuration files.
Click Select to specify a Mobility Domain to import configuration
information to. Then select the Mobility Domain from the list.
397