3Com 3CRWX120695A Reference Manual page 135

3WXM assumes the WX switch that will manage the Distributed MAPs
will be located in a wiring closet on another floor in the building.
To create a wiring closet
1 On the Plan RF Coverage page of the Building wizard, click the Wiring
Closet icon.
2 On the floor layout, click the location of the wiring closet. The Create
Wiring Closet dialog box appears.
3 In the Name box, type the name of the wiring closet (1 to 60 characters,
with no tabs).
4 If you have not defined a WX switch in 3WXM, click Finish to save the
changes. Otherwise, go to step 5.
3WXM determines how many WX switches are needed when it
computes how many MAP access points are required and automatically
creates them.
5 To add a WX switch you previously created to the wiring closet, click
Choose Available, and select the WX switch from the list. Repeat for
additional WX switches.
To remove a WX switch from the wiring closet, select it from the list of
WX switches and click Remove.
Defining Wireless Coverage Areas 135