Site Objects - 3Com 3CRWX120695A Reference Manual

50 C 2: W
HAPTER ORKING WITH THE

Site Objects

3WXM U I
SER NTERFACE
Table 8 WX Switch Objects (continued)
Spanning Tree
Properties
AAA
802.1X
ACLs
Mobility Profiles
IP Services
Table 9 lists the Rogue Detection objects. These objects control
configuration parameters for rogue detection.
Table 9 Rogue Detection Objects
Object
Rogue Detection
Known Addresses
The Sites section of the Organizer panel contains objects for the buildings
where you want to deploy 3Com equipment. A site can contain one or
more buildings and each building can contain one or more floors. Each
floor contains objects for wiring closets, coverage areas, MAP access
points, and third-party access points.
Table 10 lists the objects in a site.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Same as Management Services in Domain Polices, but
applicable to this WX switch only.
Description
Setting for countermeasures, which are packets that
3Com radios send to prevent clients from using rogue
access points detected during RF scanning.
List of devices you want WX switches to ignore when
performing rogue detection and issuing countermeasures
against the rogues the WX switches detect.