Configuring Mobility Profiles - 3Com 3CRWX120695A Reference Manual

344 C 7: C
HAPTER ONFIGURING
Configuring
Mobility Profiles
A , A
UTHENTICATION
about ACL name restrictions, see "Setting Up ACL Basic Properties" on
page 348.)
12 In the Out ACL Name box, type the name of the output ACL that applies
if the location policy rules are matched. The name can be 1 to 32
alphanumeric characters, with no spaces or tabs.
13 Click Finish to close the wizard and save the changes.
Mobility Profile™ attributes allow or deny access to the network for a
specific user or group of users. When you create a Mobility Profile, you
specify which MAP ports, Distributed MAPs, or wired authentication ports
are to be included. Typically, you include ports that are defined as MAP
ports or Distributed MAPs. You can specify that all or no ports are
included, or you can specify a list of ports to be included.
After creating a Mobility Profile, you can assign it to users created in the
local WX user database, or users who are authenticated and authorized
by a RADIUS server. You assign the name of the Mobility Profile by using
the Mobility-Profile RADIUS attribute, which is a 3Com vendor-specific
attribute (VSA).
1 Access the WX Switch wizard for the WX switch. (See "Accessing the
Modify Switch Wizard" on page 185.)
2 Select AAA at the top of the wizard, if not already selected.
3 Select Mobility Profile from the organizer list on the left side of the page,
if not already selected.
, A
UTHORIZATION AND CCOUNTING
P
ARAMETERS