Maintaining Application Program And Configuring Through Command Lines; Maintaining The Router With Tftp Server - 3Com MSR 50-40 ROUTER. Installation Manual

Modify this file Attribute:
1.
2.
3.
4.
5.
Enter your choice(1-5):1
Enter "1" to set the selected application program to be the main boot file, i.e. the default boot file of the
system.
Step 6: Enter <5> to exit to the main BootROM menu. Enter <1> to boot from the CF card.
The file in the CF card will be overwritten if the file name being input is the same as the original file
name in the CF card.
Make sure the space on memory is sufficient. Or, the system prompts insufficient space:
Updating File main.bin
Insufficient CF Card space or failed device writing operation
The file updated will directly replace the original file of this type to become the only application
program. The main.bin file downloaded here will replace the original M file directly to become the
main boot program.
Refer to section "Files" for detailed descriptions of file types.
Do not include path information in the filename input during upgrade.
You can set the main/backup attributes for the startup file under the root directory of the device
only.
Maintaining Application Program and Configuring Through
Command Lines
After booting the router normally, you can upgrade and backup application program and backup and
recover configurations under command line mode.

Maintaining the Router with TFTP Server

The TFTP service provided by the router is TFTP Client — the router serves as TFTP Client, and the file
server serves as TFTP Server. You can input commands to upload the configuration file and application
program of the router to the file server, or download configuration file or application program to the
router from the file server.
Configuring environment
Step 1: Set up hardware environment (refer to section "Upgrading Application Program Through
Ethernet Interface" for details), and point the server path to the folder where the file is put.
+Main
-Main
+Backup
-Backup
Exit
5-16