Receiving (Uploading) Data
11-4 Receiving (Uploading) Data
434
When transferring the data in units of screens, if there are changes in a
memory table and /or direct access, transfer such data along with the
screen data.
Otherwise the system may operate unpredictably.
To receive (upload) data stored in a PT at the Support Tool as the screen data
being edited, follow the steps shown below.
The type of data that can be received is indicated in the table below.
Data Type
Application (in file units)
Screen
Direct Access Information
CAUTION
Description
All data is sent in batch.
Data is received in units of a screen.
It is possible to receive the data of several
screens at a time.
When receiving the data of a parent screen,
you can specify whether or not the data of the
child screens is to be received with the parent
screen data.
NT20, NT20S and NT600S:
Information on the PC (PLC) addresses allo-
cated to the PT status control area, PT status
notify area, numeral/character string memory
table (string table), etc.
NT21:
Information on the PC (PLC) addresses allo-
cated to the PT status control area, PT status
notify area, and window control area.
NT31, NT31C, NT631, and NT631C:
Information on the PC (PLC) addresses allo-
cated to the PT status control area, PT status
notify area and window control area (models
with "-V1" and above).
Section
11-4