Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 420

Quick Reference
Item
Displaying
To switch the displayed
character
character string according
strings to the touch switch input.
(texts)
To display a character
string in which a special
symbol or character is in-
serted.
To insert image data and
library data into a string
with NT21 and
NT31/631-V2 and above
Screen
To display a blank screen
display
To switch the screen using
a touch switch
To switch the displayed
screen according to a PC
(PLC) bit status.
Operation
(1) [Objects] [Touch Switch]
Copy text to a character string memory table entry
(string table) using a touch switch for which the copy
function is set.
(2) [Objects] [String Display]
Display the contents of the copy destination character
string memory table entry (string table).
PT
Character string memory
Screen
table (String table)
ABC
Character string display
Touch switch (copy function)
[Objects] [Fixed Display]
Specify the mark, or image/library code.
Specification: ABCt!FE20uDE
Display: ABCLDE
[Tool] [PT Configuration]
Set NT20/30/620 Compatible Mode on.
(The range of image/library data is as the same as
NT30/620 series in NT20/30/620 Compatible Mode.)
Specify screen No. 0 at the first word in the PT status con-
trol area.
Note With NT20, NT20S, NT30, NT30C, NT600S, NT620S,
NT620C, and NT625S, if screen No. 0 is set for the
touch switch assigned the screen switching function,
the previous screen is displayed instead of a blank
screen.
[Objects] [Touch Switch]
Create a touch switch for which the screen switching func-
tion is set.
Screen
[Tools] [Table] [Bit Memory]
Set the bit memory table screen switching function.
PT
Screen No. 1
Screen No. 2
[Function: Copy Setting]
Constant ABC
ABC
[Text]
[Function: Switch Screen]
Screen No. n
PC (PLC)
Section 10-1
Refer to
6-8-6
6-7
6-2-7
3-3
1-3-4
6-8-2
7-4
409