Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 429

Quick Reference
Item
Image To modify the size of an
image data
Label
To display a label in multi-
ple lines
To change the contents
and the position of a label
according to the ON/OFF
status of the lamp bit
To change the contents of
a label according to the
values in PLC memory
To insert image data and
library data into a string
with NT21, NT31/631-V2
and above
Lamp To centralize the lamp la-
bel
418
Operation
(1) Specify the area of an image data to be shrunk or ex-
panded on the image editor.
(2) Drag one of the green handles (J) displayed on the
range specifying frame to modify the size of an image
data.
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which Static or On Off
Static is set as the label type.
(NT21, NT31/631-V2 and above)
(1) [Objects] [Lamp] or [Touch Switch]
Create a lamp or a touch switch for which On Off
Static is set as the label type
(2) Turn the PC (PLC) bit to which the lamp is allocated
ON/OFF.
PT
Screen
If ON
ABC
DEF
If OFF
Lamp or touch switch with On Off static label
(Only for NT21, NT31/631-V2 and above)
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which Numeral Display
is set as the label type.
(Only for NT21, NT31/631-V2 and above)
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which String Display is
set as the label type.
(Only for NT21, NT31/631-V2 and above)
[Tool] [PT Configuration]
Enable NT20/30/620 Compatible Mode.
(The range of image/library data is as the same as
NT30/620 series in NT20/30/620 Compatible Mode.)
Specify the lamp to be centralized and select [Draw]
[Centralize Label]
Section
PC (PLC)
Bit
10-1
Refer to
8-1
6-5, 6-8
6-5, 6-8
6-5, 6-8
6-5, 6-8
3-3,
APPENDIX A
6-1-9