F-Key Input Notify Table; Operation Procedure - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

F-Key Input Notify Table

Reference: S It may take time to import I/O comments when there are many I/O comments.
7-8

F-Key Input Notify Table

7-8-1 Operation Procedure

[Enter]
[TAB] [TAB] [Enter]
[TAB] [Enter]
n
100.03 comment3
[TAB] [TAB]
n
100.04
[TAB] [TAB] [Enter]
n
100.05
[TAB] [Enter]
comment4
[TAB] [TAB] [Enter]
[TAB] [TAB] [TAB] [EOF]
100.06 comment5
[TAB] [TAB]
ABC 100.07 comment6
[TAB] [TAB]
n: Blank space
[Enter]: Enter code
S There are the PLC address, I/O Comment, and Reference in an I/O comments
table. Addresses with no comment and no reference will not be downloaded to
PT. (See below)
With Comments
Without Comments
f: Can be downloaded
Lines in an I/O comment table with only the PLC address input (for future use
etc.) will not be downloaded to PT, and as a result, when the data is uploaded to
the Support Tool, the line itself will be lost. (This also applies when saving data
in mmi format.)
S Support Tool cannot import more than 3,000 PLC addresses with comments.
Therefore, if there are more than 3,000 PLC addresses with comments, only
the addresses will be imported for PLC addresses from entry 3001 onwards.
(I/O comment import operation will be finished normally.)
Rejected entries are displayed in the Error Log. Check them by selecting [Error
Log] from the [View] menu and print them.
This table is only available for NT11S/NT11. The F-Key Input Notify Table con-
sists of four entries. Each entry is assigned to a function key in the PT device. It
specifies a PC (PLC) memory bit to be related to a corresponding function key.
An F-Key Input Notify Table is displayed by following the operation described be-
low.
S Select [Tools] (menu bar)
edit field
Ignored
NG
Ignored
OK
[Enter]r
OK
NG
NG
NG
OK
[EOF]
OK
[EOF]
[TAB]: TAB code
[EOF]: End of file
Referenced
f
f
: Cannot be downloaded
[Table] [F-Key Input Notify] tab
Section 7-8
--- ---
--- ---
--- ---
0010003 comment3
0010004
--- ---
--- ---
--- ---
0010006 comment5
0010007 comment6
Not Referenced
f
Specify the
305