Table of Contents
Advertisement
Graphs
Operation Procedure
Terminology
Property setting
Selection using the menu bar: [Objects]
Selection using the drawing toolbar:
Display %
–Range
General
Position:
Indicates the display position of an analogue meter.
(The reference point is at the upper left corner of the analogue me-
ter. It changes depending on the other settings.)
Size:
Center Point: Indicates the center point of an arc or a circle of the analogue me-
ter.
(It is not affected by other settings.)
Radius:
Indicates the meter radius of an analogue meter.
(It is not affected by other settings.)
Frame:
Specify whether or not a frame is displayed for a meter of an
analogue meter. When the frame display is ON, select the frame
color. (Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Display Sign:
Specify whether or not a display area for negative value is dis-
played.
Direction:
Specify the positive direction of an analogue meter.
Clockwise, Anti-Clockwise
Meter Shape
Shape:
Specify the shape of an analogue meter.
Quarter, Semi-Circle, Circle
Direction:
Specify the display direction of an analogue meter.
Right ( ), Left ( ), Up ( ), Down ( )
Type:
Specify the display type of an analogue meter.
Needle, Fill
Width Rate:
Specify the meter width of an analogue meter in % format re-
garding the radius as 100%.
10 to 100 (by 1%)
[Graph]
[Analogue Meter]
Foreground Color
Scale
Frame
+Range
Section
6-9
229
Hide quick links:
Advertisement
Chapters
Table of Contents
