Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 176

Alarm
displayed on PT while the whole data is displayed on the Support Tool. Be sure to
set image/library data display area so that image/library data fits inside it.
S For an alarm list element, the property settings, bit memory table, and charac-
ter string memory table (string table) are related to each other as shown below.
Displayed
Alarm list
at ON
ABC
S An alarm list element is used in combination with bit memory table entries. How
they function is shown below:
Setting at bit memory table
S Setting at Set dialog box
PLC Address
S Setting at Function dialog box
History
Screen No.
Switch Screen
Screen No.
String Table Entry
Image/Library Code
Use of image/library data
Image/library code
Color
Property settings for alarm list element
Start Bit Table Entry
No. of Bits Referenced
S The setting for the [Switch Screen] bit memory table setting differs between the
NT30, NT30C, NT620S, NT620C, and NT625C, and the NT21, NT31, NT31C,
NT631, and NT631C as shown below.
NT30, NT30C, NT620S, NT620C, and NT625C:
Specifies whether or not the screen is switched at the same time the PC
(PLC) bit allocated to bit memory table entry goes ON.
Bit memory table
Character string memory
table entry (String table):10
Image/library data
:FE20
PC (PLC) address
:0001000
Number of bits; Set for No. of Bits
Referenced
Table Entry No.: Set for Start Bit
Table Entry
Section 6-3
Character string
memory table
(String table)
ABC
10
DEF
11
GHI
12
JKL
13
Image data
FE20
Specified PC
(PLC) bit
163