Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 347

Library Editor
[Help] . . . . . . . . Displays Help about the library table dialog box.
S Specifying a code
To specify a code for operations, click on the objective line (library code).
To specify the continuous codes collectively, click on the first code to be se-
lected and then the last code to be selected while pressing the Shift key.
If you click on a code while pressing the Ctrl key, the code will be selected or
deselected alternately each time it is clicked.
S Preview Function
Support Tool provides a preview function that can display the contents of the se-
lected code.
When two or more codes are selected, the preview of the code selected last will
be displayed in preview window.
The preview window can be switched ON and OFF using the
Buttons.
S Deleting the library data
To delete a library data, follow the procedure below. Deleted library data will not
be stored to the clipboard and its code itself will be also deleted. When two or
more codes are selected, they will be deleted collectively.
(1) Select [Library Editor] from the [Tools] menu.
The library table is displayed.
(2) Select the code of the library data to be deleted.
When two or more codes are selected, they can be deleted collectively.
(3) Perform one of the following operations.
S
button
S Right click on the selected code
S
button
Selected code will be deleted after you click the
firmation dialog box.
S Cutting/copying the library data
To cut or copy a library data, follow the procedure below. The cut/copied library
data will be stored to the clipboard and can be pasted to the other codes.
In case of "cut," cut code will be deleted from the library table. In case of "copy,"
copied code remains in the library table.
[Delete]
[Delete]
Section 8-2
/
Button in the con-
335