Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 476

Data Conversion
Correction related to continuous screens
Correction related to overlapping screens
Status before
Conversion
With a new model, With a conventional
word addresses are model, word
within four digits. addresses remain
as they were.
With a new model, The word address is
the word address is reset.
five digits.
With a new model The word address is
with V2/V3, the ac- reset.
cessible CS/CJ-se-
ries area is speci-
fied.
When the data of a conventional model is converted into data for a new model, an
error may occur due to differences in the handling of continuous screens be-
tween conventional models and new models.
S Difference
New models:
Conventional models:
S Conversion result, error message and corrective action
Status before
Conversion
With conventional The parent screen
models, continuous of the continuous
screens are used. screens is deleted.
When overlapping screens are converted, an error may occur due to differences
in the handling of overlapping screens between conventional models and new
models.
S Difference
New models:
Conventional models:
S Conversion result, error message and corrective action
Status after
Error Message
Conversion
––
Invalid PC (PLC)
address. It is reset
to default.
Invalid PL (PLC) ad-
dress. It is reset to
default.
Continuous screens cannot be used.
Continuous screens can be used.
Status after
Error Message
Conversion
The screen no.
XXXX was a Con-
tinuous Parent
Screen that is not
supported in this
model. It is dis-
carded.
A window/keyboard screen cannot be specified as a
child screen.
A window/keyboard screen can be specified as a
child screen.
Appendix A
Corrective Action
––
Reset the word address
to a number of four or
less digits. If this PC
(PLC) address is re-
ferred to from the pro-
gram, it is necessary to
correct the program ac-
cordingly. (Refer to
6-1-10 Setting Proper-
ties.)
Reset the word address
to an accessible area. If
this PLC address is re-
ferred to using program-
ming, also make correc-
tions in accordance with
the programming. (Refer
to Word setting for an
element in 6-1-10 Set-
ting Properties.
Corrective Action
Use a touch switch to
switch screens. If the
program is created to
display the parent
screen of continuous
screens, correct the pro-
gram so that the first
child screen is dis-
played. (Refer to 6-8-2
Switch Screen Touch
Switch.)
467