Description Of Numeral Memory Table Fields - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Numeral Memory Table

7-2-3 Description of Numeral Memory Table Fields

Image object (Indirect reference)
[Objects] [Fixed Display]
Library object (Indirect reference)
[Objects] [Fixed Display]
Standard lamp (Label type: Numeral display)
[Objects] [Lamp]
lamp)
Touch switch (Label type: Numeral display)
[Objects] [Touch Switch]
S When writing numeral data to a numeral memory table entry
Numeral input element
[Objects] [Data Input]
Thumbwheel switch element
[Objects] [Data Input]
S When copying numeral data between numeral table entries, or when setting a
constant for a numeral memory table entry
Touch switch (copy setting)
[Objects] [Touch Switch]
The display format varies slightly depending on the PT model. The example
screen shown above is for the NT21, NT31, NT31C, NT631, and NT631C.
Value
Specify the initial value to be set when the power is switched ON, the PT is reset,
or the mode is changed from the System Menu to RUN.
The range of values that can be input in this field is shown below.
PT Model
Other than NT21, NT31,
NT31C, NT631, and NT31C NT631 and
NT631
NT21, NT31, NT31C, NT21, NT31, NT31C,
NT631, and NT631
[Image Display]
[Library Display]
[Standard] ([Edit] in the Label property of standard
([Edit] in the Label property of touch switch)
[Numeral]
[Thumbwheel Switch]
[Settings-Copy Setting] in property sheet
Input Type
BCD
Hexadecimal 00000000 to FFFFFFFF
Decimal –2147483648 to 2147483647
Hexadecimal $00000000 to $FFFFFFFF
Section 7-2
Input Range
F9999999 to 99999999
*1
277
*2