Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 9

Safety Precautions
Safety-related Indications and Their Meanings
The following precautionary indications and symbols are used in this manual to aid in the safe usage of the
NT-series Support Tool for Windows (Ver. 4.j). These precautions contain important safety information.
Be sure to observe them carefully.
The indications and symbols used herein, and their meanings, are as listed below.
WARNING
Caution
Precautions for Safe Use
Indicates actions that should be done, or avoided, for the safe use of this product.
Precautions for Correct Use
Indicates actions that should be done, or avoided, to prevent operating failure or malfunction of this prod-
uct, or to prevent adverse effects on the performance or functions of this product.
Note
Notes within the text of this manual indicate safety–related points and information that are equivalent in
importance to those included in the Precautions for Safe Use sections.
Symbols
WARNING
x
Indicates a potentially hazardous situation which, if not avoided, could re-
sult in death or serious injury. Additionally, there may be severe property
damage.
Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury, or property damage.
Disassembly Prohibition
Indicates prohibitions when there is a possibility of injury, such
as from electric shock, as the result of disassembly.
Electrical Shock Caution
Indicates the possibility of electric shock under specific condi-
tions.
Indicates the possibility of injury by high temperature under
specific conditions.
Failure to read and understand the information provided in this manual may result
in personal injury or death, damage to the product, or product failure. Please read
each section in its entirety and be sure you understand the information provided in
the section and related sections before attempting any of the procedures or op-
erations given.