Table of Contents
Advertisement
Printing Reports
Reference: If the print setup, print, or print preview has been executed under condition that
12-2-2 Output to a Printer
450
Size:
Set the size of paper to be used.
Source:
Set the paper tray to be used.
Orientation:
Set the direction of printing paper.
Portrait:
Specify this item if the data is to be printed parallel to the short-
er dimension of the paper.
Landscape: Specify this item if the data is to be printed parallel to the longer
dimension of the paper.
[Properties]:
Used to set the printer properties.
Since the setting differs according to the printer, refer to the manual of the printer
driver.
no printer driver has been installed, there may be times Support Tool does not
move correctly.
To output the report to the printer, follow the procedure shown below.
(1) Select [File] (menu bar)
The Reports dialog box is displayed. (page 451)
(2) Set "Printer" for [Destination].
(3) To specify the printing position of the paper, click on [Set Margins ..] button.
The Set Margins dialog box is displayed.
After setting the items in this dialog box, click on
dialog box is displayed again.
(4) To set the header/footer, click on the [Header/Footer] button.
The Header and Footer dialog box is displayed.
After setting the items in this dialog box, click on
dialog box is displayed again.
(5) After completing the setting, click on
The Print dialog box is displayed. (page 455)
Set the print range and the number of copies.
[Print].
in the Reports dialog box.
Section
12-2
. The Reports
. The Reports
Hide quick links:
Advertisement
Chapters
Table of Contents
