Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 406

Creating the Sample Data
Reference: For NT21, NT31, NT31C, NT631, and NT631C, this dialog box is not displayed.
394
S Creating the alarm list
(5) Select [Objects] (menu bar)
(6) Click the mouse with the mouse cursor set at the position where the alarm
list is to be displayed (at the intended upper left corner).
(7) Make the following settings in the dialog box for selecting whether or not
the line scroll touch switches and page scroll touch switches are used.
Create Line Scroll Touch Switch
Create Page Scroll Touch Switch
For these models, create the alarm list and then set whether or not the line/page
scroll touch switches are created in the property settings.
(8) Set the properties as shown below.
General Position
Size
Message
Color
Image & Library Display ImageLib
Settings List Settings
(9) Adjust the display position of the alarm list by dragging it.
After that, click on any position in the screen other than the alarm list to cancel the
alarm list selected state (edit state).
S Changing the frame of the line scroll (down) touch switch
(10) Specify the switch at the bottom in the touch switches at the right side of
the alarm list and adjust its size and position (move it to the lowest line in
the alarm list).
(11) Double click the line scroll (down) touch switch and set the properties as
shown below.
[Alarm] [List]. (Refer to 6-3-1 Alarm List.)
n
n
Length
Display Line Qty
Scale
Smoothing
Frame
Back- ON
ground ground
OFF
Color Foreground
Background
Start Bit Table Entry
No. of Bits Referenced 8
Section 9-3
––
––
32
8
1 2 (High)
n
White
White
Black
n
White
Black
0