Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 235

Touch Switches
Guidance
Reference: S A cursor moving touch switch can be created automatically when creating a
222
S When a cursor moving touch switch is pressed, input is enabled at the speci-
fied (or associated) input field.
S Settings shown below can be made only with the NT21 and with the NT31,
NT31C, NT631, and NT631C "-V1" and above.
Local 2
Window Position
Replace Local Window
S If a cursor moving touch switch is created automatically at the creation of a nu-
meral/(character) string input element, the touch switch is created overlapping
the input field.
S It is possible to specify a window (keyboard) for a cursor moving touch switch.
This specification enables display of the specified window (keyboard) by sim-
ply pressing the cursor moving touch switch.
Numeral/(character) string input field
Touch switches
1 2 3 4 5 6
assigned with
cursor movement
and window open
functions
numeral input element or a (character) string input element.
S If [Auto Arrange] is selected, it is not possible to move a touch switch indepen-
dently. To move a touch switch independently, deselect this attribute.
S If a cursor moving touch switch is created later independently, the touch switch
can be associated with a specific input field. Specify the touch switch and se-
lect [Draw] (menu bar)
from an input field, select [Draw] (menu bar)
S Cursor movement among data input fields is also possible using control code
input touch switches for which arrow-symbol key codes are set.
Numeral/(character) string input field
–41.8
ABCDE
When the touch switch
at the top is pressed
[Associate With]. To disassociate the touch switch
Section
1 2 3 4 5 6
–41.8
1 2 3
4 5 6
Specified window opens.
[Disassociate].
6-8