Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 14

Description of NT31, NT31C, NT631 and NT631C
xvi
When you need information about the operations, functions, etc., of the PC, refer
to the operation manual for the PC, advanced function unit, or communication
unit being used.
There are two types of the NT31, NT31C, NT631, and NT631C, models with the
suffix "-Vj" and models without the suffix "-Vj." In this manual, they are written
as "NT31, NT31C, NT631 and NT631C" collectively when it is not necessary to
classify them. However, they are written separately as "NT31, NT31C, NT631,
and NT631C with -Vj" and "NT31, NT31C, NT631, and NT631C without -Vj"
when it is necessary to classify them. (The system program version will be indi-
cated as "NT31, NT31C, NT631 and NT631C with (System Ver. 3.1)," if re-
quired.)
The system programs of the NT31, NT31C, NT631, and NT631C with "-V2" or
"-V3" (System Ver. 3.1/4.1) are supplied by NT-series Support Tool for Windows
(Ver.4.j). System Ver. 4.1 is supported only by NT31, NT31C, and NT631C
models with "-V3." It cannot be installed to upgrade the NT31, NT31C, NT631, or
NT631C below "-V3." It is possible to upgrade NT31, NT31C, NT631 and
NT631C models without "-V2" to System Ver. 3.1 by installing the new system. In
this case, however, the functions indicated below cannot be used even though
other functions can be used in the same way as the models with "-V2."
S 32-dot font
For details of 32-dot font, refer to Settings for text display in 6-1-10 Setting Prop-
erties. Note that smoothing is not performed for 32-dot font.
For details of font types, refer to Font Type in 3-3 Operation of Screen Data (Ap-
plication) File and Appendix K.