Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 413

Creating the Sample Data
Creating a temporary input field
Reference: With the NT21, NT31, NT31C, NT631, and NT631C, this dialog box is not dis-
(11) Select all the touch switches above.
(12) Select [Centralize Label] from the [Draw] menu.
The position of all the labels for the selected touch switch is centralized
both vertically and horizontally.
(1) Select [Objects] (menu bar)
(2) Click the mouse with the mouse cursor set at the position where the data
input field is to be displayed (at the intended upper left corner of numeral in-
put field).
(3) At the cursor moving touch switch use selection dialog box, set the dis-
played items as shown below.
Create Cursor Move Touch Switch
played and, accordingly, the cursor moving touch switch cannot be set at the
temporary input field. For a temporary input field, the setting of "Create Cursor
Move Touch Switch" is not so significant. Even with NT20, NT20S, NT30,
NT30C, NT600S, NT620S, NT620C, and NT625C, it is not necessary to set this
property.
(4) Set the properties as shown below.
General Position
Font Type
Scale
Smoothing
Attribute
Color
Settings Table Entry
Display Type
Format
*1
Settings Limit
Settings Zero Suppression
Display Sign
Settings Focus Frame
Focus Attribute
*1: The setting is not needed for the NT21, NT31, NT31C, NT631 and
NT631C.
(5) Specify the numeral input field and adjust the position.
[Data Input] [Numeral].
Standard
2 2
n
Standard
Foreground Black
Background White
10
Decimal
Integer 8
Decimal 0
Maximum 99999999
Minimum 0
n
n
n
Standard
Section 9-3
––
401