Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 92

Types of Screens, Common Dialog Box Settings and Operations
Screen No.
History (other than NT20/NT20S)
Title (other than NT20/NT20S)
Comment
Backlight - Type
Backlight - Color (only for NT30)
Buzzer (other than NT11S/NT11)
Load Local 1 (Keyboard) (other than NT11S/NT11, NT20, NT20S and NT600S)
Specify a screen number. The screen number of an existing screen may be
changed.
Specify whether or not the event of screen display is to be recorded in the display
history record (Screen history Log). The display history function records the
date/time and frequency of screen display for screens for which the [History] at-
tribute check box is ticked. The recorded display history can be checked on the
occurrence history screen and the frequency history screen.
The event of screen display is recorded in the display history if the check box of
the history attribute is ticked; if it is not ticked, the event is not recorded.
Specify the title of screens that are displayed in the display history.
Setting of the title is possible only when the history attribute is selected.
Set the comment for a screen. For the comment, characters of up to 24 charac-
ters can be set.
Set if the backlight is to light continuously or flash when the screen is turned ON.
Light: When the screen is turned ON, the backlight lights.
Flash: When the screen is turned ON, the backlight flashes.
This attributes cannot be set for NT600S, NT620S, NT620C, NT625C.
Specify the backlight color, white or red.
Specify whether or not the buzzer should sound when a screen is displayed and
also the type of buzzer sound.
If this attribute is selected, the buzzer sounds when a screen is displayed.
The buzzer type can be selected from the following.
Continuous: The buzzer sounds continuously.
Short: The buzzer sounds in cycles of 0.5-second beep and 0.5-se-
cond stop. (Setting is not possible for NT20, NT20S and
NT600S.)
Long: The buzzer sounds in cycles of 1-second beep and 1-second
stop. (Setting is not possible for NT20, NT20S and NT600S.)
Beep: The buzzer sounds in cycles of 0.5-second beep and 0.5-se-
cond stop. (Only for NT20, NT20S and NT600S)
Buzzer type setting is possible only when the buzzer attribute is selected.
Select whether or not a local window 1 (Keyboard) pops up on the screen when
standard screen is opened.
Section 5-1
79