Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 387

Creating the Sample Data
Reference: With the NT21, NT31, NT31C, NT631, and NT631C, codes assigned to image
Creating [Bar Graph 1] and [Bar Graph 2]
(4) Adjust the position of "Image Lamp" character string on the data creation
screen by dragging it.
S Setting the image/library lamp
(5) Select [Objects] (menu bar)
(6) Click the mouse with the mouse cursor set at the position where the
image/library lamp is to be displayed (at the intended upper left corner).
(7) Set a check mark in the check box of the [Code] for OFF, in General, and
click on
(8) In the image table, specify "FE20" and click on
(9) Set a check mark in the check box of the [Code] for ON, in General, and
click on
(10) In the image table, specify "FE21" and click on
(11) Set the lamp function properties as shown below.
Light Address
Functions Functions
(12) Adjust the display position of the image/library lamp.
data are from 0001 to 0FFF. However, if NT20/30/620-compatible mode is used
with the NT21, NT31, NT31C, NT631, and NT631C, the image code will be the
same as NT30, NT30C, NT620S, NT620C and NT625C.
S Creating the title
(1) Select [Objects] (menu bar)
(2) Click the mouse with the mouse cursor set at the position where the char-
acter string of [Bar Graph 1] is to be displayed (at the intended upper left
corner of bar graph).
(3) Set the properties as shown below.
Description
Position
Font Type
Scale
Smoothing
Attribute
Color
[Lamp] [Image].
.
.
PC (PLC) Bit Address
I/O Comment
[Fixed Display]
Bar Graph 1
Standard
1 2 (High)
n
Standard
Foreground White
Background Black
Section 9-3
.
.
L0000005
Image Lamp
[Text].
––
375