Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 120

Common Operation
Reference: S The element selected in the Select Object dialog box is also selected on the
Batch selection of multiple elements
For a complicated screen, element select operation will be easier if a filter func-
tion (refer to 5-1-4 Filter Function) is used to limit the display objects.
(1) Select the element at the foremost position.
(2) Select [Edit] (menu bar), then select [Select Object].
This operation is also possible using the pop-up edit menu; display the pop-
up edit menu by right clicking the mouse and choose [Select Object] in the
menu.
The list of elements behind the element selected first is displayed.
(Detailed information of the objects are displayed in the list. However, part of
the information may not be displayed for some objects such as lamps/touch
switches with long label.)
(3) Select the desired element from the list.
(4) Click on
(2)
(1)
screen so that you can confirm which element is being selected before you
click the
S In the Select Object dialog box, object information same as the one displayed
on the status bar is shown.
For details, refer to page 42.
It is possible to select multiple elements collectively.
S Using the Shift key
Click an element while holding down the Shift key, and it is added to the pre-
viously selected elements. If you click a selected element while holding down
the Shift key, the element is deselected.
S Specifying a range
.
(3)
button.
+ Shift
Section 6-1
(4)
107