B System Installer Operation - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Reference: Version up of NT31, NT31C, NT631, NT631C with "-V1" (system program Ver.
Applicable PT Models
Reference: S The Support Tool is provided with the system programs of the following PT
Starting and Exiting the System Installer
Appendix B
System Installer Operation
The Support Tool is provided with a system installer, which installs the system
program at a PT.
Version up of the PT system program or installation of new communication pro-
grams in a PT are possible by installing the system program.
2.1)" or below is possible by installing the system program that is supplied with
the Support Tool (Ver. 4.j).
For details of the conversion method, refer to Appendix A Data Conversion.
In this case, however, the following function can not be used.
S 32-dot high-definition font (Refer to Settings for text display in 6-1-10 Setting
Properties.)
S Font type ISO8859-1 (Refer to Font Type in 3-3 and Appendix K.)
S Memory unit system transmission (Refer to operation manual of NT31,
NT31C, NT631, NT631C with "-V2".)
To reuse the existing NT31, NT31C, NT631, NT631C screen data, the screen
data should be converted to the data for system program Ver.3.1 beforehand.
The system installer is used to install the system program in the following PT mod-
els.
NT11S/NT11, NT21, NT30, NT30C, NT31, NT31C, NT620S, NT620C/
NT625C, NT631, NT631C
Note For the individual PC (PLC) models, always install the system program of the
specific PT model. It is not permissible to install the system program of another
PT model.
models.
NT31, NT31C, NT631, NT631C with "-V2" (system program Ver.3.1),
NT11S/NT11, NT21, NT30, NT30C, NT620S, NT620C/NT625C
The system program must be installed with the system installer when installing
the Support Tool at your personal computer. For details of installation at the
personal computer, refer to Section 2 Setting Up the Support Tool.
These system programs can be transmitted to a PT using the system installer
supplied with the Support Tool (Ver.4.1).
The system installer is started by pressing the Windows start button, then
selecting [Programs]
shown below.
[Omron] [Ntst4.8] [NT-series System Installer] as
485