Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 208

Lamps
Reference: To check lamp ON status on the editing screen, select [Simulate ON/OFF] from
Guidance
Set Lines: Displays the On/Off Description Settings dialog box. This
dialog is for entering Off Description and On Description with
multiple lines.
In all NT21 and NT31/631 V2 models, Labels can be entered in multiple lines.
The following table shows the specification for each PT model.
Maximum
number of
characters
NT21 128
NT31/C-V2 128
NT631/C-V2 256
The Set Lines button will display On/Off Description Settings dialog box, in which
the On/Off description can be entered in multiple lines by pressing Enter Key.
When Numeral Display or String Display is selected as Label Type (For the NT21
and NT31/631-V2 Models only)
Indirect Reference:
If a numeral in the specified memory table entry is treated as the reference table
entry number for indirect reference, specify this item.
Table Entry:
Specify the address of the numeral or string memory table entry to be referred to.
If [indirect Reference] is not selected, the contents of this numeral or string
memory table entry are displayed, and if [indirect Reference] is selected, the con-
tents of this numeral memory table entry are treated as the reference table entry
number and the contents of the reference memory table entry are displayed.
Edit:
Displays the Numeral Display or String Display property page. For description on
property settings refer to 6-6 Numeral Display and 6-7 Character String Display.
the [View] menu.
Additionally, to view flashing display of lamp attribute, select [Simulate Flash]
from the [View] menu. For details, refer to 5-1-3 Changing the Display Method on
the Support Tool.
S The following kinds of standard lamps are provided.
Rectangle Circle
Maximum Number of
number of lines per-
characters mitted
per line
32 1 to 8
40 1 to 15
80 1 to 30
Polygon Sector
Section 6-5
Remarks
Maximum number of
characters per line in-
clude the "\n" charac-
ter.
Maximum number of
characters per line in-
clude the "\n" charac-
ter.
Maximum number of
characters per line in-
clude the "\n" charac-
ter.
195