M Connecting Cable Specifications - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Tool Interface Connector Specifications
Assembly of Connecting Cables
25-pin Connector
Personal computer
Note Connect the shield wire to the connector hood at both the personal computer and at the PT.
Appendix M
Connecting Cable Specifications
The following specifications apply to the connection between the PT and the sup-
port tool (personal computer).
Pin No.
1
2
3
4
5
9
Wiring should be carried out in one of the following ways, depending on the type
of RS-232C connector.
Connector
hood
Use the following recommended products when making the connecting cable.
Name
Connector
Connector hood
Cable
Signal Name
FG Frame ground
SD Send data
RD Receive data
RS Request to send
CS Clear to send
SG Signal ground
Shield
Model
XM2D-2501 25-pin Made by OMRON
XM2A-0901 9-pin Made by OMRON
XM2S-2511 25-pin Made by OMRON
XM2S-0911 9-pin Made by OMRON
AWG28 5P Multi-core shielded cable Made by
IFVV-SB Fujikura, Ltd.
CO-MA-VV-SB Multi-core shielded cable Made by
5P 28AWG Hitachi, Ltd.
Meaning
Connector for peripheral
devices on PT body
Connector
hood
Remarks
555