Improved Input Key-Window/Keyboard Function - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Window/Keyboard Screens
Reference: The size and position of the pop-up display frame can be specified as follows:

5-4-2 Improved Input Key-window/Keyboard Function

Types of windows
Global window
Local window
(3) To move the pop-up frame, drag any position in the dotted lines other than
handles.
When the mouse cursor is positioned on dotted lines other than at handles,
the shape of mouse cursor changes as shown below. The pop-up display
frame moves when the mouse cursor is dragged in this state.
(4) After the size and the position of the pop-up display frame are determined,
click on an arbitrary point in the screen other than the pop-up display frame.
The size and the position of the pop-up display frame are set and the han-
dles are cleared.
To change the size and the position of the pop-up display frame, repeat the
procedure shown above from step (1).
S NT30, NT30C, NT620S, NT620C, NT625C:
S NT21, NT31, NT31C, NT631, NT631C:
This section describes input key-window/keyboard function that was improved
for the NT21 and the NT31, NT31C, NT631 and NT631C "-V1" and above.
Following two types of windows are available.
This window can be kept displaying all the time regardless of the screen dis-
played on PT. Global window stays at the same position even when the displayed
screen is switched. (Global window will be closed automatically when the screen
other than user screen was displayed, and will be re-displayed when the screen
was switched back to user screen.)
Only one global window can be displayed at a time.
It can be opened, closed or moved only by the operation of Window Control Area
from the host. For details of Window Control Area, please refer to the operation
manual of PT.
This window will be closed when the screen displayed on PT is switched.
By setting local window for attribute of each screen, specified window can be
opened at the same time the screen is opened.
Up to two local windows can be opened at the same time. (Local window 1, Local
window 2)
Local window can be opened, closed or moved by following operations.
Setting screen attribute (Opens when the screen is displayed.)
Section
Specify by 1 dot unit
Specify by 20 dot
5-4
95