Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 252

Graphs
Intervals can be set in the manner shown below.
Note that intervals are set as numbers of dots.
(1) Specify the point for which the interval is to be set. The field of the specified
point is displayed in reverse video.
(2) Change the width between points (the number of dots).
(3) Click on
(4) After setting the interval for all point positions, click on
S When displaying a broken-line graph, the display points are determined by cal-
culating the percentage value based on the values for 100%, 0%, and –100%.
If the 100% value, 0% value, and –100% value are set as indicated below, ref-
erence values are displayed in the broken-line graph as shown below.
Value referred to: 3000
Value referred to: 1500
Value referred to: 0
Value referred to: –1000
Value referred to: –2000
.
100%
50%
0%
–50%
–100%
Section 6-9
.
239