Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 327

Recipe Table
Description of Recipe Setting Dialog Controls
314
This Recipe Setting dialog allows you to specify the settings for an entry in the
recipe table.
Number
Displays the recipe number in the recipe table.
When creating a new entry, the lowest available number is suggested.
The maximum recipe number is 200.
Name
Specifies the name of the recipe entry.
A character string of up to 12 characters can be accepted.
Insert Mark
Insert a mark object in recipe name.
Comment
Specifies a comment for recipe entry.
A character string of up to 24 characters can be accepted.
No. of Records
Inputs the number of records required for this recipe entry. If this entry is being
created, default value is 2.
Allocate up to a maximum of 200 digits.
No. of Parameters
Inputs the number of parameters required for this recipe entry. If this entry is be-
ing created, default value is 2.
Allocate up to a maximum of 200 digits.
Storage Type
Sets the numeral data type for parameter values in each record of this recipe
entry.
PLC Address
Inputs the starting PLC address for this recipe entry. Bit addresses cannot be
specified.
Set
Sets the starting PLC address via an address composition dialog.
I/O Comments
Inputs comments for the starting PLC address. By default, the current comment
is shown.
A character string of up to 16 characters can accept.
Section 7-10