Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 162

Fixed Display
Reference: S Transparent background can be set for tiling objects. However, it will not be dis-
S Tiling is possible for the elements shown below.
Rectangle, circle, polygon, sector
In addition to the elements indicated above, tiling is possible for an area en-
closed by a solid line of the same color (border color). If an element such as a
lamp that changes status is specified for the border, however, tiling may not be
executed correctly due to changes in color and display.
S To check the tiling status, select [View] (menu bar) then select [Full Tiling]. The
result of tiling will be displayed (in this state, a check mark is set for [Full Tiling]
in the display menu.).
When [Full Tiling] is selected again, then return to the previous J mark (han-
dle).
Selection of
[Full Tiling]
S To execute tiling, specify the same color for the border of area and the border of
a tiling element.
Tiling is executed in the enclosed area for which the same color as the color set
for the border is set. If an enclosed area with the same color does not exist, the
tiling extends outside the enclosed area.
S If the tiling area is not an enclosed area, the tiling spills out the specified area.
S The patterns are displayed in the actual status of tiling according to the setting
for the foreground and background color.
The available tiling patterns are shown below.
played as transparent on the Support Tool. When the screen is downloaded to
a PT, it will be displayed as transparent.
(1) Double-click the screen to display the screen property.
(2) Set Red for screen background color.
(3) Register a tiling object on the screen and set Transparent for the back-
ground and for Pattern.
(4) Check ON the [View] – [Full Tiling] command.
(5) Tiling will be executed and the screen background color (red) will be invisible
(figure (a) below).
(6) When this screen data is downloaded to a PT, background color for tiling ob-
ject will be transparent (figure (b) below).
It will not be transparent.
(a) Support Tool screen
Section
Selection of
[Full Tiling]
It will be transparent (red).
(b) PT screen
6-2
149