Recipe Screen Element - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Recipe Screen Element

Operation procedure

6-11 Recipe Screen Element

6-11-1 Recipe Screen Element
Operation procedure
Terminology
Description of Recipe Screen Element Components
Follow the procedure below to use color palette symbol.
1. Open new screen to place color palette on it.
2. Drag required tiling pattern symbol from palette symbol and drop it on the
screen created in 1.
3. Select [Ungroup] from the [Draw] menu to cancel the grouped status (default
status) after confirming that the dragged symbol is in selected status.
4. Clear the check mark for [Full Tiling] from the [View] menu to select the tiling
object easily after you decided which one to use, then drag it to the objective
screen while depressing [Ctrl] key (or perform copy&paste). To check the til-
ing status, select [Full Tiling] from the [View] menu. However, in this status,
the position of tiling object will not be clear. Cancel the [Full Tiling] status when
required.
5. Border color of tiling objects in color palette symbol is set to White. Change
the border color of tiling object by displaying property sheet if required.
Note that the transparent background color is not registered for color palette
symbol. Change the property afterwards when you want to apply transparent
background.
Recipe screen element provides you with an interface to apply a set of data val-
ues from the recipe table to the PLC.
It can only be placed on a standard screen and it can be displayed in the parent
screen. The screen element property dialog box has 4 pages – general, touch
switch, setting and interlock.
Selection using the menu bar:
Selection using the drawing toolbar:
Name
Specifies the recipe name.
Section
[Objects] ! [Data Input] ! [Recipe]
6-11
259