Creating The Alarm List Library Data - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Creating the Sample Data

9-3-11 Creating the Alarm List Library Data

Reference: With the NT21, NT31, NT31C, NT631, and NT631C, the library data codes are
Create the library data that is displayed at the occurrence of an alarm.
Create the library data for FA20 to FA25. (For the library data creation procedure,
refer to 8-2 Library Editor.)
FA20
Set line 1.
FA23
Check pipe and
valve.
1000 to 3FFF. However, if NT20/30/620-compatible mode is used with the NT21,
NT31, NT31C, NT631, and NT631C, library code will be the same as NT30,
NT30C, NT620S, NT620C and NT625C.
S Creating the library data of code FA20
(1) Select [Tools] (menu bar)
(2) Specify FA20 in the library table and click on
(3) Click the library creation area frame (dotted lines) that is displayed at the
upper left area in the library creation screen and drag the point at the lower
right corner. The mouse cursor position is displayed under the screen;
change the frame size to X=200, Y=200 (size: 200 200).
(4) Select [Objects] (menu bar)
(5) Click the mouse at the position where the character string is to be dis-
played (at the intended upper left corner of text).
(6) Set the properties as shown below.
Description
Position
Font Type
Scale
Smoothing
Attribute
Color
FA21
Set line 2.
FA24
Detection near
entry. Confirm
safety before re-
starting the line.
[Library Editor].
[Fixed Display]
Set Line 1
Standard
1 2 (High)
n
Inverse Flash
Foreground White
Background Black
Section 9-3
FA22
Check torque
screw.
FA25
Check the PC
(PLC) and the
network.
.
[Text].
––
397