Operating Procedure Of Color Palette Symbol - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Registering Created Elements (Symbol Manager Operation)
Reference: S Symbols created by different PT models can be pasted to a data creation
Pasting an ISO symbol
Drag the symbol to the data creation screen and release the mouse.
Reference: It is not possible to change the colors and size of ISO symbols, since the ele-

6-10-5 Operating Procedure of Color Palette Symbol

Color palette symbol
258
screen. In this pasting operation, the symbol data is automatically converted
and, if an error occurred in data conversion, an error message is displayed. For
details, refer to Appendix A Data Conversion.
S Concerning image/library data, only the code is registered at the symbol man-
ager. Therefore, if the image/library data is pasted to another screen data file,
the image/library data of that code in the file to which the data was pasted is
displayed.
S If the ISO symbols, supplied by the CD-ROM version Support Tool, are used
with NT20, NT20S, or NT600S, those symbols that consist of elements that
are not supported may not be displayed correctly.
S Image/library collection, supplied by the CD-ROM version Support Tool, can
be used only with models that can use image/library.
To paste an ISO symbol to the data creation screen of the Support Tool, select the
symbol and drag it to the desired position on the data creation screen, then re-
lease the mouse. (Same operation as the other symbols.)
ments are registered in the grouped status.
Color palette symbol is a symbol for which tiling objects are registered with their
tiling patterns, foreground and background colors respectively combined. You
can select required tiling objects while checking the tiling status on screen.
Color palette symbol is separated into tiling patterns and each pattern is set as
one symbol as shown below. Combinations of foreground and background col-
ors are registered for each symbol.
Section 6-10