Table of Contents
Advertisement
Printing Reports
452
Screen Image Attribute
Inverse Print:
Hide Screen Grid:
Show Dotted Line Frame: Specify this item when you want to include the
Screen:
Specify the screen to be printed.
All:
Select this item to print all screens.
Range:
Select this item if you want to print only specified screens.
Specify the screen numbers using a comma (,) as a delimiter.
By joining two page number with a hyphen (–), you can specify
the range. ("5 - 12," for example, indicates the range from
screen
No. 5 to screen No. 12.)
Include:
Specify the items to be printed.
It is possible to select all items.
Screen Image:
Screen Information:
Lamp/Touch Switch Number:
Specify this item when you want to inverse
black and white for printing.
When this item is selected, the screen image
will be monochrome even when color-printer
is used. With the color-type PT, the screen
image will be turned to gray and the screen will
be inverse for printing.
Specify this item when you do not want to in-
clude screen grid for printing. With the default
status, check mark is set. If it is unchecked,
the grid is printed according to the grid setting
of each screen's property.
dotted line frame for the following objects.
S Dotted line frame indicating the position of
string input and string display
S Dotted line frame indicating the touch
sensing area of touch switch
S Dotted line frame indicating the display
position of image/library data of an image
lamp
(The status of an image lamp to be printed
depends on the [Simulate ON/OFF] set-
ting of the [View] menu. With lamp ON sta-
tus, display position of image/library data
for OFF state is shown with the dotted line
frame and with lamp OFF status, display
position of image/library data for ON state
is shown with the dotted line frame.)
Specify this to print the screen image.
Specify this to print the detailed screen setting
information.
Specify this when there is a lamp and/or touch
switch on the screen and you want to print the allo-
cated bit number of a lamp and/or touch switch.
Usually in the case of a touch switch, the allocated
bit number specified when setting a lamp is
Section
12-2
Hide quick links:
Advertisement
Chapters
Table of Contents
