Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 219

Table of Contents

Advertisement

Character String Display
Reference: When there are no string to show, string input will be invisible.
206
Example
Specifying memory table address 2
Direct designation
Character string
memory table
(String table)
Display
1
TOOL
2
TOOL
3
4
5
The contents of the specified
memory table entry are displayed.
Indirect designation is possible only in the following cases. Do not apply for other
cases.
S When C200H I/F unit is used.
S When the NT20, NT21, NT30, NT30C, NT31, NT31C, NT620S, NT620C,
NT625C, NT631, or NT631C is used.
S When an NT20S or NT600S that uses direct connection ver. 5 is used.
With conventional models, up to 50 indirect designation settings can be made
per screen, including both numeral display and (character) string display.
S If the value set for [Length] (the number of digits to be displayed) is smaller than
the number of characters in the specified character string memory table entry
(string table), the specified number of characters is displayed from the first
character of the (character) string. The remaining characters are not dis-
played.
S To display mark data or image data, specify the address of the mark data or
image data as shown below.
Note that image data cannot be inserted into a (character) string when using
the NT11S/NT11, NT20, NT20S, NT21 (20/30/620 mode off), NT31, NT31C,
NT600S, NT631, NT631C, NT31/C-V2 (20/30/620 mode off), and
NT631/C-V2 (20/30/620 mode off).
Setting
ABC<!FFFE>
ABC
Mark data at code FFFE
Therefore, with Support Tool, dotted-line frame is displayed in character fore-
ground color enclosing string input.
(This frame will not be displayed on PT.)
This frame can not be set to off. However, the dotted-line frame can be set to ON
and OFF when printing screen image (refer to page 425).
Indirect designation
Numeral
memory table
1
5
2
3
4
5
The contents of the specified numeral
memory table entry are treated as the
table entry address reference value and
the contents of the referenced memory
table are displayed.
Display
Section
6-7
Character string
memory table
(String table)
Display
1
TOOL
2
3
4
TOOL
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt-series support tool for windows 4

Table of Contents