Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 144

Common Operation
Batch address change operation
Reference: Batch address change operation is possible using either the dialog box displayed
Possible memory types and characters are as follows (available only for
NT31/631 models):
Character
R
AL
AQ
I
Q
T
M
S
SA
SB
SC
G
f
: Specification possible
Input a Data Offset as a 4-digit number (leading zeros can be suppressed).
PLC Vendor: Siemens
Possible memory types and characters are as follows (available only for
NT31/631-V1 models):
Character Memory Type
C Counter
DB Data Block
I Input
IW Input
M Bit Memory
MW Word Memory
Q Output
QW Output
T Timer
f
: Specification possible
Input a address number as a 4-digit (5 digit in case of DB) number (leading zeros
can be suppressed) and a bit number as a 1-digit number.
The set PC (PLC) addresses can be changed into the required addresses in a
batch. Since the change source can be specified as a range, processing such as
changing the address range DM 1000 to DM 01499 to the address range
DM 1800 to DM 2299 is possible at one time. Shifting in bit units is also possible.
by [Tools] [Table...] or the function called by [Tools]
pending on how the address change operation is called, the objective addresses
Memory Type
Register
Analog Input
Analog Output
Discrete Input
Discrete Output
Discrete Temporary
Discrete Internal
System Status
System Status A
System Status B
System Status C
Genius Global Data
: Specification not possible
Address
f
f
f
f
f
f
f
f
f
: Specification not possible
Section 6-1
Data Offset
f
f
f
f
f
f
f
f
f
f
f
f
Bit
f
f
f
f
[Change Address]. De-
131