Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 351

Library Editor
Screen Configuration of Library Editor
Operating the library editor
Reference: Library data that is cut or copied on the library editor window can be pasted onto
Changing the size and display position of the library data specifying frame
The screen configuration of the library editor is described below.
Using the library editor, you can create a graphic using fixed elements in the
same manner as creating graphics in a standard screen. The size of the library
data specifying frame is taken as the size of the library data. The position and
size of the library data specifying frame can be changed as needed.
Only the graphic in the range of the library data specifying frame is registered as
the library data.
For details on how to use fixed elements, refer to 6-2 Fixed Display.
the other library editor window or standard editing screen (The data can be
pasted until another data is stored to the clipboard). Also, fixed-display elements
that were cut or copied from standard editing screens can be pasted onto the li-
brary editor window.
When more than one library editor window is displayed or when two Support
Tools are opened by [Import Component] from the [File] menu (same PT model
setting), cut, copy and paste operations between these library editor windows
are possible. For details, refer to 3-3-6 Importing Components from Different
Screen Data File (Starting Up the Second Support Tool).
Library data
To change the size of the library data specifying frame or move it, follow the steps
described below.
Section
Library data specifying frame
Edit area
Display of library data
A circle extending outside
the specifying frame is not
displayed as library data.
8-2
339