Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 190

Data Input
If a touch switch on input field No. 2 is pressed, the No. 2 input field becomes
the objective field for data input. The data input using the numeric keys is
stored in input field No. 2.
S A cursor moving touch switch is created using the dialog box that is displayed
when creating a numeral input element. The properties for the cursor moving
touch switch can be set in the same manner as for a standard touch switch.
How the properties for a touch switch are set is shown below.
For details of [Settings], refer to 6-8 Touch Switches.
S If a check mark is set for [Use Window/Keyboard Screen] in the cursor moving
touch switch setting properties, it is possible to display the specified window/
keyboard at the same time the cursor is moved.
This feature allows appropriate numeric keys for the input field to be displayed.
It is possible to create a temporary input field in addition to numeric keys.
(With the NT21 and with the NT31, NT31C, NT631, and NT631C "-V1" and
above, all objects other than thumbwheel switch and recipe objects can be
created on window.)
Window/Keyboard
Displayed when the
input field is touched.
Section 6-4
177