Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 551

Error Messages
O
[Object Name] – % value is out of limit.
Default values restored for 100%, 0%,
and –100%.
[Object Name] has exceeded the maxi-
mum number of characters.
[Object name] refers to invalid numeral
table entry. The referenced table entry is
reset to entry 0.
[Object Name] – Invalid PLC address. It
is reset to default.
[Object Name] – inverse attribute not
supported. Foreground and Background
colors interchanged.
Overlapping screen has more than 1
child screen containing Thumbwheel/Nu-
meral/String Input elements.
P Please make sure this parent screen
have at least 2 children.
S Sampling cycle less than the minimum
value. Minimum value is restored.
Sampling cycle not multiple of 5. Value
rounded off to nearest multiple of 5.
Screen is empty, downloading may not
be possible.
Some objects exceed library size in code
FA20. The objects will not be down-
loaded to PT hardware.
String Table: Table Entry XXX has invalid
component code. It has been converted
from XXXX to YYYY.
T The associated touch switches of the
alarm has been discarded and compo-
nent touch switches have been created.
The child screen XXX containing Numer-
al/String Input element(s) does not have
the same key attribute as the overlapping
screen.
Error Message Corrective Action
Correct the screen data or the program at
the host so that a value of up to 8 digits
will be sufficient for the 100% value, 0%
value and –100% value in the bar graph.
Set the character string within the limit.
Correct the table entry number to a num-
ber within the valid range. If the table entry
number is specified in a program, correct
the program also.
Reset the word number to a number of up
to 4 digits. If this PC (PLC) address is re-
ferred to from the program, it is necessary
to correct the program accordingly.
Since foreground color and background
color are automatically interchanged, no
special correction is required (display at-
tribute is set to default (standard).).
Overlapping screens do not allow the set-
ting of multiple input functions. Correct the
child screens.
Select the parent screen, then right click
the mouse and select [Modify]. Insert at
least 2 child screens for the parent screen.
Since there are no problems in actual op-
eration, correction is not necessary.
Since there are no problems in actual op-
eration, correction is not necessary.
Create the data in the empty screen or de-
lete the empty screen.
Reduce the size of elements exceeding
the library size using the library editor, or
set a larger library size.
Delete the code from the character string
and make corrections so that an equiva-
lent display can be obtained by displaying
and grouping the character string and the
fixed display image/library data.
Correct the position of the control touch
switches as needed. If a control touch
switch is not necessary, cancel the check
for the control touch switch in the alarm
list/history properties. (With alarm touch
switches for NT31, NT31C, NT631, and
NT631, it is not possible to change the
size and label.)
In the screen properties, set the same
[Keypad] attribute both for the parent and
child screens.
Appendix K
549